Homepage

| HomepageImprint |       <- Choose a page inside one of the above categories.

News

| Overview

Products

| Overview | Raw material testing instrumentsInstruments for specimen preparationInstruments for mechanical testsInstruments for thermal testsInstruments for electrical testsFire Testing InstrumentsColor- and gloss testing instrumentsBalancesTemperature- and climatic chambersOther machines and instrumentsLab4you

Services

| Overview

About us

| Overview

Contact

| OverviewMap and DirectionsContact Form

Information

| OverviewLinks

Website in german
Website in dutch

Fluometer

Bulk Density Tester Model ADP

The bulk density tester to measure the apparent or bulk density of pellets and powders of different raw material supplies. Furthermore, the values determined with this equipment were used for the calculation of the filling space of an injection mould tool. The bulk density at powdered, granular and other materials is determined according the EN ISO 60 and DIN 53468.

Data Sheet
Filling Funnel Inner Diameter:56 mm
Volume Filling Funnel:approx. 200 ml
Output Diameter:33 mm
Diameter Measuring Cup:45 mm (+/- 5 mm)
Measuring Cup Volume:100 ml (+/- 0,5 ml)
Dimension (WxDxH):300 x 150 x 250 mm
Weight:approx. 5 kg
Data sheet/brochure available on request
Order number: 1010.000

Download Leaflet Fluometer

Pourability Tester Model PM

As a check and for the control of the pourability of plastics in powder and granulates form by means of the determination of the flow through times by a funnel the pourability tester is used. The EN ISO 6186: 1998 defines two procedures (A and B), whereby from procedure A information can be derived to the processability; procedure B serves particularly for process control during the production.

The equipment consists of a mounting plate with a stable stand for the funnel holding. At the discharge of the funnel a thread for the attachment of different discharge nozzles (diameter 10, 15 or 25 mm) is designated.

The flow time is the time, which a certain mass or a certain volume of the sample necessarily, in order to flow by a funnel with exactly defined dimensions. This time is indicated in seconds.

Data Sheet
Dimension(WxDxH):300 x 150 x 250 mm
Weight:approx. 8 kg
Data sheet/brochure available on request
Order number: 1012.000

Download Leaflet Fluometer

Pourability Tester according Dr. Pfrengle

As a check and for the examination of the pourability and/or the pouring angle of plastics of powder and granulates form in accordance with ISO 4342 and/or DIN ISO 4324.

Technical characteristics:

  • Glass funnel with large inside diameter (approx. 140 mm) and small discharge diameter (10 mm)
  • Agitator with agitating crank and agitating wing
  • Baseplate with stand
  • Adjustable knive and rule
  • Basis disk 100 mm in diameter, 25 mm of thickness
Data Sheet
Dimension(WxDxH):300 x 150 x 300 mm
Weight:approx. 8 kg
Data sheet/brochure available on request
Order number: 1011.000

Download Leaflet Fluometer